Accessories Magnetic Labels Tie plates Footplates

Longspan shelving can carry a loads of up to 775Kgs per shelf dependant of the shelf width. This boltless system is an easy system to install and adjust. The uprights and beams are fully powder coated to give a hardwearing and durable finish. The standard bay is supplied with four shelves incl. top and bottom, protective feet, and weight loading labels. It is available in six standard heights, six widths and six depths as follows;   Heights: 1448mm, 1980mm, 2440mm,                 3050mm, 3660mm & 4575mm Widths:  914mm, 1220mm, 1525mm,                  1830mm, 2134mm & 2440mm Depths:  380mm, 455mm, 610mm,                 760mm, 915mm, & 1220mm   The system has unrestricted access to all sides with no bracing required.

Longspan Two Tier System

This Two-Tier shelving installation is created from our Longspan shelving system to give an econimcal optimum shelving solution.

Galvanised Shelving

A less expensive method of shelving an area is to use galvanised longspan shelving but using galvanised steel creates a hardwearing and corrosion resistant finish. However, the shelf load is limited to 250kgs UDL and  there are a limited number of bay height, shelf widths and depths available as follows;   Heights: 1980mm, 2440mm Widths:  1830mm, 2440mm Depths:  455mm, 610mm, 915mm & 1220mm.   All shelves are adjustable. The shelving includes 15mm thick high density chipboard and plastic feet. It is also available with galvanised steel panels.

15mm thick high density chipboard. This standard and most cost effective finish for our shortspan shelving system and suitable for most applications.	18mm thick high density melamine faced and edged chipboard. A more aesthetic finish and is easy to wipe clean. However this comes at a slight premium.	Mesh shelf panel. Only available in 1830mm & 2440mm long and 610mm, 915mm & 1220mm deep. Allows airflow and sprinkler acess.

Orange beam/blue upright

Grey beam/blue upright

Blue beam/blue upright